Specialty Products Company Caster Adjusting Tool 85900

$25.95

2 in stock

Category:

Description

Caster adjusting toolApplicable to the following vehicles:BUICK FWD 1985 and Up ElectraLeSabre 1986Cadillac FWD 1985 and Up DeVilleFleetwoodOldsmobile FWD 1985 and Up “98”1986 Delta 881. Inspect suspension for loose, worn, or bent parts2. Determine amount of caster change needed.3. Remove 3 upper struts nuts and brackets4. Raise vehicle at designated jacking points allowing strut to hang free of strut tower.5. using template included in kit mark area around single round hole in top of strut tower.6. using 1/4″ drill bit, drill several holes in the marked area.7. use 1/4″ rotary file to elongate and clean 1 1/2″ hole.8. Lower vehicle so strut bolts are located in tower holes.  DO NOT LOWER VEHICLE ALL the WAY. Tires should be touching slightly; turn plates.9. Install caster adjusting tool. 10. Turn tool nut to change caster. Readings can be taken any time without bolt down strut.11. When the desired caster has been obtained, install three strut nuts and torque (18 ft lb.s) to manufacturer’s spec.12. Recheck caster and proceed with alignment. Road test vehicle.